rotary dryerEV Charger AC Wall Mounted Charging Pile

Rotary Dryer

Rotaty dryer is a drying equipment commonly used in industrial and agricultural production,

로터리 건조기 388

Production Capacity사용자 지정 가능
Feed Particle SizeBelow 15mm
Heat SourceNatural as, Coal, Diesel, Biomass
Application AreasMinerals, fertilizers, grains, wood, chemical products and other materials

간단한 소개

Rotary dryer is traditional and reliable drying equipment, the material will be lifted up and fallen down by the lifting plates inside of the cylinder while the cylinder is rotating, the moisture in the material is continuously evaporated when the material contacts with the hot wind inside of the cylinder, to achieve the purpose of drying materials. It is suitable for drying sludge,biomass， coal, sand, animal dung, fly ash, clay, coal slime, ore, steel slag, quartz sand, kaolin clay, bentonite, sawdust, desulfurization gypsum, compound fertilizer,etc.

프로세스

The dewatered material will be transported to feeding head of the dryer through the screw conveyor after scattering, and then it will be sent into the inside of the dryer through the unpowered spiral sealing feeder (the patent technology of our company), and going through several following working areas after getting into the dryer: of the dryer is treated by dust removal and smoke washing to meet emission standards.

1. Material leading-in area

The material will come into contact with the high temperature negative pressure air after getting into this area and plenty of water will be rapidly evaporated, and the material can’t be formed into sticky stuff under the stirring of large guide angle lifting plate.

2. Cleaning area.

The material curtain will be formed while the sludge is lifted up at this area, and it will cause the material stick on the cylinder wall while it’s falling down, and the cleaning device is installed at this area (Lifting style stirring plate, X type second time stirring plate, impacting chain, impacting plate), the material can be quickly removed from the cylinder wall by the cleaning device, and the cleaning device can also crush the materials which are bonded together, so as to increase the heat exchange area, increase the time of heat exchange, avoid the generation of wind tunnel phenomenon, improve the drying rate;

3. Inclined lifting plate area

This area is the low temperature drying area, the slime of this area is at the low moisture and loose state, and there is no adhesion phenomenon at this area, the finished products reach the moisture requirements after the heat exchange, and then enter the final discharge area;

4. Discharging area

There aren’t stirring plates at this area of the dryer cylinder, and the material will be rolling to the discharging port.

The material gradually becomes loose after drying, and discharged from the discharging end, and then sent to the designated position by the conveying device, and the fine dust drawn out along with the tail gas is collected by the dust collector.

Hot air enters into the drying machine from the feeding end, and the temperature is gradually reduced at the same time of material convection heat transfer, and the water steam taken out under the suction of induced draft fan, and then emitted into the air after processing.

제품 이점

1. The operation parameters can be changed according to the different material properties, the material in the dryer cylinder can form stable material curtain, to make the heat exchange more fully;

2. New feeding and discharging device, put an end to the phenomenon of the plug in feeding, incontinuity, nonuniform and material return of traditional dryer, and reduce the load of dust removal system;

3. The adjustable stainless steel plates’ sealing are adopted at the connection of the feeding and discharging devices, it’s with good sealing property, which greatly reduces the thermal losses inside of the cylinder, so as to directly reduce the fuel consumption;

4. Counterflow drying method, it can obtain higher evaporation intensity; downstream drying method and indirect drying method are suitable for drying materials which are sensitive to temperature;

5. Fuel can be diesel oil, heavy oil, and natural gas, gas, coal, electricity and biomass particles for environmental protection;

6. All kinds of different types of lifting plates combination, to ensure the hot air is in full contact with the material, and meet the needs of drying different material.

클릭하여 모두 확장

제품 매개변수

Model	Cylinder diameter(mm)	Cylinder length(mm)	Cylinder volume(m3)	Cylinder rotary speed (r/min)	Power(kW)	Weight(t)
0.6×5.8	600	5800	1.7	1-8	3	2.9
0.8×8	800	8000	4	1-8	4	3.5
1×10	1000	10000	7.9	1-8	5.5	6.8
1.2×5.8	1200	5800	6.8	1-6	5.5	6.7
1.2×8	1200	8000	9	1-6	5.5	8.5
1.2×10	1200	10000	11	1-6	7.5	10.7
1.2×11.8	1200	11800	13	1-6	7.5	12.3
1.5×8	1500	8000	14	1-5	11	14.8
1.5×10	1500	10000	17.7	1-5	11	16
1.5×11.8	1500	11800	21	1-5	15	17.5
1.5×15	1500	15000	26.5	1-5	15	19.2
1.8×10	1800	10000	25.5	1-5	15	18.1
1.8×11.8	1800	11800	30	1-5	18.5	20.7
1.8×15	1800	15000	38	1-5	18.5	26.3
1.8×18	1800	18000	45.8	1-5	22	31.2
2×11.8	2000	11800	37	1-4	18.5	28.2
2×15	2000	15000	47	1-4	22	33.2
2×18	2000	18000	56.5	1-4	22	39.7
2×20	2000	20000	62.8	1-4	22	44.9
2.2×11.8	2200	11800	44.8	1-4	22	30.5
2.2×15	2200	15000	53	1-4	30	36.2
2.2×18	2200	18000	68	1-4	30	43.3
2.2×20	2200	20000	76	1-4	30	48.8
2.4×15	2400	15000	68	1-4	30	43.7
2.4×18	2400	18000	81	1-4	37	53
2.4×20	2400	20000	91	1-4	37	60.5
2.4×23.6	2400	23600	109	1-4	45	69.8
2.8×18	2800	18000	111	1-3	45	62
2.8×20	2800	20000	123	1-3	55	65
2.8×23.6	2800	23600	148	1-3	55	70
2.8×28	2800	28000	172	1-3	75	75
3×20	3000	20000	14	1-3	55	75
3×23.6	3000	23600	170	1-3	75	85
3×28	3000	28000	198	1-3	90	91
3.2×23.6	3200	23600	193	1-3	90	112
3.2×32	3200	32000	257	1-3	110	129
3.6×36	3600	36000	366	1-3	132	164
3.8×36	3800	36000	408	1-3	160	187
4×36	4000	36000	452	1-3	160	195

클릭하여 모두 확장

고객 사례

첨단 기술과 신뢰할 수 있는 제품을 통해 많은 고객에게 효율적인 정화 및 친환경 환경 보호 솔루션을 제공하고 있습니다.